Home » FAQs » Can someone give me step by step directions on how to adjust my Truss Rod on my 4 string Rickenbacker Bass?
Can someone give me step by step directions on how to adjust my Truss Rod on my 4 string Rickenbacker Bass?
Written by admin on December 2, 2008 – 4:20 am -
He is sitting around for some years and I want to get back into play. I don 't want to spend the money to have them rearranged but they have never made myself. I don 't want to f $% k up. Aid please.
Tags: Money, Step Directions, Truss Rod
Posted in FAQs |
By PJH on Dec 4, 2008 | Reply
Round the ***** or nut clockwise bend the neck backward, lowering the strings. Loose strings so they 're really relaxed, make the recording, then the tune of support to launch. Don 't turn it over 1 / 4 of turn. If that 's not enough, has left the bass sit for a day and then turn the turn of another 1 / 4. If it 's an old bass and was sregolata long, it might be safer to leave a shop he does, because the neck can fendersi.
By leftie1959 on Dec 6, 2008 | Reply
Very easy. I repaired them enough to know. First, remove the pot and vederete not one but 2 bind rods in Rickenbacker. Correct? Now, sure that it is in a A-440. By doing this, loosen the string of A and E, a complete turn. Now, if their is an arch in the middle of the neck, you have to turn the ***** registration clockwise 1 / 4. I assured you are tightening the shaft of the beam closest to the E-string. Now, string the string of A and E to step. Still not satisfied, and turn abbassili yet another shot of 1 / 4. Do this until the neck is almost right. NOTE: they must be at least 1 / 16 - 1 / 8 to bow once the work is done right. Take the same for the string of G and D. Loose one turn and turn the ***** clockwise 1 / 4 turn and repeat just like above. Except this time, the road of loose beam closest to the smallest string G. If your neck when you are avvistando down to the head engine, is convex, (folded in the opposite direction), then loose nut 1 in full turn counter-clockwise. String strings and see if it is still convex…. Repeat with an increase of spin of 1 / 4, this time. That 's it.